Hibi Series (日々) — Cappuccino Cup
Couldn't load pickup availability
Complete your coffee setup
Everything you need for the perfect cup
-
Brazil Vale DouradoFresh specialty beans to fill your cup68 AED
-
Era Coffee Beans ScoopMeasure the perfect dose every time60 AED
-
MHW-3BOMBER Coffee Bar Barista TowelKeep your coffee bar clean and dry65 AED
Hibi Series (日々) — Cappuccino Cup
Hibi means day after day, the quiet rhythm of mornings that repeat. This is the cup at the center of the range: the one you reach for without deciding, the one that ends up by the machine because it never goes back in the cupboard. At 250 ml it takes a proper cappuccino with its cap of foam, a small latte, or a matcha latte with enough milk to soften the edges. Big enough to settle into, small enough to still feel like a cup.
Each cup is made by Japanese artisans in Mino, Gifu Prefecture, where kilns have fired continuously for more than 1,300 years. The glaze goes on before the firing, the kiln finishes it at 1,200°C, and the two never agree exactly. Speckle, pooling and tonal shifts move from one cup to the next. Consider that a signature rather than a flaw.
Two glazes. Aogami is folded and creased like a sheet of blue paper, the pair to Shiragami in the Nagomi Series. Kasane stacks a band of speckled brown over a pale crackle base, two glazes layered like strata in the earth.
Highlights
- Capacity 250 ml to the brim, around 205 ml as poured
- Sized for cappuccino, small latte and matcha latte
- Mino ware, made in Gifu Prefecture, Japan
- Stoneware, kiln-fired at 1,200°C
- Glaze varies piece to piece. The photographed cup is a close representative, not identical
Origin & Craftsmanship
Mino ware is one of Japan's oldest living pottery traditions, produced in the kilns of Gifu Prefecture since the seventh century. Oribe green, Shino white and the ash glazes still in use today were all developed here. In this series, surface, weight and tone carry the slight differences that only a working kiln can leave behind.
Overview
Overview
Stoneware with a thick wall and a proper foot ring, so it sits steady, holds heat, and feels substantial in the hand without being heavy. The glaze runs thin at the rim and pools toward the base, which is where each cup shows its character.
Every piece is kiln-fired in Mino at 1,200°C, and no two firings are the same. Surface, tone, and depth of color shift slightly from cup to cup. Consider that a signature rather than a flaw.
Provenance
Provenance
These cups come from the Tōno region of Gifu Prefecture, the heart of Mino ware. Kilns have fired here for over 1,300 years, and the towns of Tajimi, Toki, and Mizunami still produce more of Japan's ceramics than anywhere else in the country. Mino is where Oribe, Shino, and Kiseto glazes were born in the sixteenth century, made for the tea masters of the day.
Each cup is made by Japanese artisans, and every firing leaves its own mark. That is why glaze pooling, crazing, and depth of color vary from piece to piece, and why we photograph every glaze individually rather than showing one and promising the rest match.
We chose these pieces for Era because they sit between two worlds. The forms are yunomi, the everyday Japanese tea cup, but the capacities line up with how we actually drink coffee: cortado, flat white, cappuccino, latte. They pour well, they hold heat, and they look right next to a matcha bowl or an espresso machine. Small quantities, brought in directly from Japan, and reordered only when the workshop can make more.
Care & Storage
Care & Storage
- Hand wash gently with warm water and mild soap.
- Avoid dishwashers to keep the glaze at its best.
- Not for microwave or direct flame.
- Dry fully before stacking or storing.
- Variation in color and glaze is the kiln’s work. Every cup leaves the firing a little different.
